|
The smooth running 1200 x 120mm aluminum sliding table is fitted with a side support frame that can be positioned where required along the table plus an extending fence rail that extends out to 2000mm. The sliding table is adjustable for height and parallel running to the blade. A work clamp and board edge shoe are provided. A 100mm dust outlet with a crown guard extraction point is fitted.
The spindle moulder has 3 speeds and has a 30mm spindle with a travel of 130mm and a maximum tooling diameter of 140mm. The spindle cutter guards have large alloy fences, adjustable for depth of cut and cutter slot gap. Sprung hold down clamps are also provided. A 100mm chip outlet allows good extraction with a suitable extractor.
The planer/thicknesser is closely based upon our popular and well regarded AW106PT2 and offers 250mm surfacing and 250mm x 180mm thicknessing capacities. The planing tables are 1050mm long and hinge out of the way for the thicknessing function.
Rear view of AWC4 250mmExcellent chip extraction is provided for with a pivoting extraction chute with a 100mm outlet. A separate control lever operates the feed rollers giving a feed speed of 8m/min, coupled with the 3 bladed cutter block which gives a very clean finish to the work.
A simple to use switching system controls each function in a safe manner with separate emergency stops and main circuit NVR protection. This is an excellent machine for those whose workshops are tight for space, and it presents very few compromises that some combination machines suffer from. N.B. 16A supply required.
|
