Kreg Precision Trak & Stop Kit

Cutting wood with accuracy is an important part of making sure the project turns out just right. The inaccuracy of pencil marks on a board can then be compounded by the need to follow that mark precisely with the saw blade. The Precision Measuring Systems Kit is designed to take the guesswork out of cutting wood to length. This kit contains 2440mm(8') (4 x 610mm(24") sections) of anodized aluminum track that can be mounted to a shop made support wing built to the height of your mitre saw. A 13mm(1/2") self-adhesive tape is then applied to the top of the fence. Finally, slide the Quick stop and Production Stop onto the top of the track and you have a precision cutting station that eliminates the need for a tape measure and pencil. Simply place the precision lens cursor over the board length desired, press the board against the stop, and cut away! Precise, repeatable cuts could not be any easier. Kit (701400) contains: 4 x 610mm(2') pieces of Top Trak, 1 Quick stop, 1 Production Stop, 1 x 610mm(2') L-R reading self-adhesive tape, 1 x 610mm(2') R-L reading self-adhesive tape & detailed instructions. Also available extra lengths of Trak 610mm long (701401) and a mitre stop (701402) that attaches to the Trak for precise 45° mitres.