• Great for the serious hobby workshop • Planing width capacity of 150mm • 2mm max depth of cut • Extruded aluminium fence can be angled between 0° and 45° • Blades are easy to change with included setting device • 1,280W brush motor • 55mm diameter dust extraction outlet • Supplied with blade setting jig, safety push pad, HSS knives and service tools
Perform CCNP 150mm Planer
A great machine for the hobby workshop with a planing width capacity of 150mm and 2mm depth of cut. The Perform CCNP has an extruded aluminium fence that can be angled over to any angle from 0-45° and has stops to return the fence accurately to 90° and 45°. The blades are easy to change (a blade setting device is included) and revolve at 9000rpm to leave a clean ripple free finish. The unit is powered by a 1,280W brush motor and comfortably deals with the maximum depth of cut even in hard woods. For safety and convenience a dust or chipping extractor should be used with the machine connected to the 55mm diameter dust extraction outlet. The machine is supplied with blade setting jig, safety push pad, HSS knives and service tools.
Perform CCNP 150mm Planer
Model
CCNP
Cuts per Minute
18,000/min
Cutterblock Diameter
48mm
Dust Extraction Outlet
55mm
Fence Size
120 x 500mm
Knives
HSS (Resharpenable) x 2
Max Depth of Cut
2mm
Max Planing Width
150mm
Nett Weight
21kg
Overall L x W x H
700 x 470 x 310mm
Power
1,280W
Rating
Hobby
Table Size
700 x 150mm
Length of Table
700mm
Better than you think!
"I've had this for almost a year and have been pleasantly surprised at how capable this little machine is! I originally bought it as a replacement for a hand-held power planer (to help quickly rough-size some new cabinet doors for my boat) but it's good enough that I've taken it to the workshop.
Time spent setting it up is richly rewarded (also buy an engineer's try square!) and you should not overwork it, but, taking a bit of time, I manage to plane everything, including oak, with great results. With carefully built - and levelled - MDF extension tables, it will happily (but slowly) do larger work.
Only complaint is that it's very light and needs bolting/clamping down, plus the plastic cover does not stand up to abuse. However, for the price, unbeatable!"
- Mr Oskar Lund
Suitable for hobby use.
"I've had the planer for a few months now and it's done a sterling job of planing even very thin (3mm) pieces of Yew to a gloss finish.
I've recently had an issue though with the poly-V belt. It obviously slipped a groove and ran up against the housing, melting part of the belt and the plastic case enclosing it.
If it were not for the drive belt slipping and melting into the case I would give this little gem a 5 rating."
- Mr Bernhard Hofmann
Axminster Power Tool Centre Ltd, Unit 10 Weycroft Avenue, Axminster, Devon, EX13 5PH. United Kingdom. VAT Reg. No. GB 792 4137 16. eCommerce by Paraspar
