Adamik VC4 Vacuum Power Clamp

The VC4 Vacuum powerclamp is intended for use as a holding mechanism for workpieces with at least one flat non-porous side. The powerclamp has no internal moving parts and the vacuum is formed utilising the venturi effect. The powerclamp requires connecting to a small compressor that gives a minimum of 1 cfm @ 80 psi. The main body is made of very robust PE/Nylon and has four fixing points, one in each corner. Provided the compressor has enough air capacity more than one unit can be joined together to form multi clamping points to do this you will need to order the correct amount of 'T' pieces and at least one on/off valve. Supplied with replacement seals, transparent airline with 1/4" BSP male fitting. Size of unit 160 x 22 x 200mm.