Adamik Vacuum Power Clamp Kit

The Adamik Vacuum powerclamp is ideal for use in a busy workshop. Attached to a standard workbench with a Bristol locking handle secured from beneath it elevates the workpiece to an ideal height above the bench for routing profiles or glueing banding onto board edges. The perfect workholding system when used in conjunction with any of the Adamik hand held edgebanders. The powerclamp has no internal moving parts and the vacuum is formed utilising the venturi effect. The powerclamp requires connecting to a small compressor that gives a minimum of 1 cfm @ 80 psi. Provided the compressor has enough air capacity more than one unit can be joined together to form multi clamping points to do this you will need to order the correct amount of 'T' pieces and at least one on/off valve. Supplied with replacement seals, transparent airline with 1/4" BSP male fitting. Size of unit 160 x 250 x 160mm.