Armeg Plumbing and Heating Installation Wrench Set
5 piece set specially developed for radiator and boiler installation Isolator Grabber Wrench simplifies installation of isolating valves, 22mm hex for blanking plugs Radiator Wrench combined 13mm hex, 10mm square and 15.5mm spanner Boiler Wrench with special slim design for use on modern Combi-boilers Compact, large capacity Adjustable Wrench up to 24mm Brass Radiator bleed key Supplied in tough storage case
Armeg Plumbing and Heating Installation Wrench Set
The PHI is a 5 piece set of wrenches, specially developed for carrying out isolator installation, radiator dressing and boiler installation. The Isolator Valve Wrench has a 22mm hexagon end for tightening or removal of blanking plugs and bleed valve housings. Its cranked design keeps wrench away from radiator edge preventing damage and the full hexagon allows location on shallow fittings. At its opposite end, an Isolator Grabber grips an isolating valve by the screw boss whilst the union nuts are tightened. The double ended Radiator Wrench includes a 13mm hex wrench for use on fittings with internal hexagon and a 10mm square wrench for use on bleed valve plugs. At its opposite end is a 15.5mm spanner for use on fittings with an external square. The Boiler Wrench is used for the tightening or loosening of the hard to access fittings on the underside of modern Combi-boilers and also fits large union nuts (30mm and 32mm). The close proximity of pipe work under modern Combi-boilers makes it difficult to get a conventional spanner onto the union nuts and tighten them. The slim design of the Boiler Wrench makes it much easier. Also included are a compact, wide opening Adjustable Wrench up to 24mm for union nuts and a brass radiator bleed key. Supplied in a dedicated storage case.
Axminster Power Tool Centre Ltd, Unit 10 Weycroft Avenue, Axminster, Devon, EX13 5PH. United Kingdom. VAT Reg. No. GB 792 4137 16. eCommerce by Paraspar