Heavy duty workshop router table Available as a complete table kit or as individual components Kits consist of faced MDF top, leg stand, router insert plate, TNVR No-volt release switch Kit with cast iron table fence (711277) Kit with Perform aluminium fence (711278)
Axminster Router Table
Available as a complete package or as individual components that assemble into a robust versatile router table suitable for use with all heavy duty 1/2" collet as well as 1/4"/8mm collet mid-range routers. Table Top Cut from faced MDF, the top is pre-machined to take our Router Table Insert and pre-drilled to take the optional stand. The faced MDF top has a 19mm groove to take the Axminster Router Table Mitre Fence, heavy duty sliding mitre fence and can be drilled to accept Axminster cast iron fence. Buying the top this way saves the purchase of a whole sheet of material and also takes out the laborious machining time as well. The top can be used with almost any of the different fences we have on offer, but will need to be drilled to accept the two clamping holes required by the cast iron one. Table size 760 x 600mm approximately, the mitre groove is 19mm wide and 146mm from front edge and the router table insert is 230 x 305mm. Legs The steel leg set bolts together to form a sturdy stand on which to mount your router table and can be secured to the floor with additional fixings if required. The stand comes flat packed and requires a modicum of self assembly. Height is 800mm. Table Insert We recommend the use of our own table insert which is also supplied with snuggers to ensure that a good tight fit is attained without any possibility of flexing or movement. There are additional accessories for the router table insert such as the guide bush adaptor and guide bushes, both of which are covered in the Router - Jigs, Accessories & Hardware section . Complete with lead-in pin. Router Fence The table is specifically designed to accept the Axminster cast iron fence to make an excellent routing table. It should be noted that the cast iron fence requires the addition of two holes and the purchase of a dust extraction outlet is reccommended. Table Kits The Axminster Router Table Kit consists of: Faced MDF top, leg stand, router insert plate, TNVR No-volt release switch and dust outlet. Cast iron Table fence (Kit No.711277).
Axminster Power Tool Centre Ltd, Unit 10 Weycroft Avenue, Axminster, Devon, EX13 5PH. United Kingdom. VAT Reg. No. GB 792 4137 16. eCommerce by Paraspar