• Load bearing components made of die-cast aluminium • Auto feed • Riffled and spring loaded infeed roller • Rubber coated outfeed roller • 2 HSS knives • Dust protected No-Volt release switch
Proxxon DH40 Thicknesser
Load bearing components are all made of die-cast aluminium, with milled seats for bearings and spindles, for vibration-free, smooth thicknessing of hard and soft woods. The result is a high grade, very smooth surface. The triple spindled table is made from die-cast aluminium and milled to close tolerances. The handwheel (zero adjustable) allows adjustments to 0.1mm. Auto feed is fitted as standard, as well as an anti-kickback device. The infeed roller is riffled and spring loaded to assist in feeding uneven materials. The outfeed roller is rubber coated to prevent marking the newly planed wood. The cutter block is fitted with two HSS knives. The on/off switch is dust protected and fitted with a no-volt release. Table length 232mm. Overall machine dimensions 280 x 230 x 235mm. Weight approx. 8kg.
Proxxon DH40 Thicknesser
Model
DH40
Capacity
40 x 80mm
Cutterblock Speed
6,000rpm
Feed Speed
4.8m/min
Knives
2
Max Depth of Cut
0.8mm
Max Planing Width
80mm
Max Thicknesser Capacity
40mm
Nett Weight
8kg
Number of Knives
2
Overall L x W x H
280 x 230 x 235mm
Power
200W
Rating
Trade
Proxxon DH40 Thicknesser
"I wasn't sure about paying the high price but must say this is a fantastic product. Planed every material I've tried, from rosewood to ebony. Solidly built and fairly quiet. Don't push it beyond it's capabilitys and you won't be disapointed.
"
- D Jones
Axminster Power Tool Centre Ltd, Unit 10 Weycroft Avenue, Axminster, Devon, EX13 5PH. United Kingdom. VAT Reg. No. GB 792 4137 16. eCommerce by Paraspar
