Rohm Industrial Angle Drive

A precision angle drive with a 3/8" x 24 tpi thread and left hand M6 locking screw to accept keyed and keyless chucks with 3/8" x 24tpi female threads. The recommended maximum chuck capacity is 10mm. (Chuck shown in our picture is a Rohm 10mm capacity keyless chuck, not included ). The head length when fitted with this chuck is 102mm. There is a slight reduction ratio of 1:0.75 i.e. the driven shaft turns once to three quarters of a turn on the chuck end. The driven shaft is a hexagonal stub 9.0mm across the flats that will fit into most 10mm keyless drill chucks. A very useful and well engineered product.