• Fits into chuck of mains power drill • Capable of cutting sheet steel up to 2.0mm • Punch and die system • Spare punch and die included with steel storage box
Axminster Power Nibbler
This power nibbler fits into the chuck of a mains power drill and is capable of cutting sheet steel up to 2.0mm. For best results the drill speed should be in the range of 1500 to 3000 rpm. It works on the same punch and die system as a true powered nibbler, effectively removing tiny crescent-shaped pieces of waste in a continuous chain. Cleverly, this nibbler is double headed, with the handle screwing over the head which is not in use, so when one die becomes worn, the handle can be swapped over and the other head brought into use. A spare punch and die are included within the steel storage box.
Good for the price
"Comes in a metal box which contains the nibbler, the handle and an extra punch. The nibbler is very light and easy to maneuver. At full drill speed (mine is a 600w) it cuts through 1mm mild steel like butter. Following lines accurately takes practice though. I've tried aviation snips and hand nibblers before but nothing compares to this. By far the easiest way to cut sheet metal."
- George Michalopoulos
Axminster Power Tool Centre Ltd, Unit 10 Weycroft Avenue, Axminster, Devon, EX13 5PH. United Kingdom. VAT Reg. No. GB 792 4137 16. eCommerce by Paraspar
