Axminster Four Way Clamping System

The low cost solution for those of us that make up panels or wide boards from narrow pieces of timber. As the name suggests, these clamps provide a four way pressure action, not only clamping the work together but pulling the panels up straight as well. This avoids any bowing or alignment problems, as the greater pressure that is applied with the clamps the greater the side action becomes. Supplied as a kit complete with heavy duty screws, all that is needed are two good strong pieces of prepared timber (maximum width 43mm) for each clamp set. When used at 300-400mm centres these four way clamping kits allow one, with very little investment, to make really flat, best quality panels every time. Supplied without timber but with comprehensive instructions. Additional clamping plates (the bits with the notches on) are available in pairs as optional accessories for making up dual-length clamps. Please note that each clamp set produces one complete clamp as shown in the picture (timber not included).