Axminster Mitre Trimmer

This heavy-duty cast iron trimmer is used by picture framers and carpenters for producing accurately cut and trimmed sections of moulding. The maximum size of timber that can be handled is 100mm(4") high and about 150mm(6") wide at 90° and 98mm at 45°. The left and right hand fences locate at either 90° or 45° with adjustable cam stops for spot-on accuracy every time. The fences can also be set and locked at other intermediate angles.The heavy duty blades are super sharp and produce an almost glass-like finish on even the toughest end grain. The top trim attachment enables the section to be presented to the blade at an angle of 45° to the vertical rather than the horizontal (see picture); this allows mitres to be trimmed on curved, hollow or difficult to hold mouldings. The maximum section width that can be used with the top trim is 65mm and there is only one angle option, 45°. The cut length attachment enables repeat cutting to precise length to be carried out.