Jet JWS-34 LX Spindle Moulder

The JWS-34 LX is really a combination of two machines, spindle moulder and router-moulder. It accepts 30mm bore tooling and in addition there are two collets, 8mm and 1/2", supplied with the machine so that, when used on its highest speed, it can utilise router cutters with a diameter of 35mm or greater (smaller cutters simply would not have a high enough peripheral speed). The machine has one fully adjustable fence, micro adjustment on the outfeed fence and a 100mm dust extraction outlet at the rear. Height adjustment of the spindle is made with a generous-sized handle on the front of the machine and tooling changes can be speeded up with the aid of the spindle lock. For curved work the moulder is supplied with a ring fence with its own integral 100mm dust outlet. On the bed of the table is a T slotted groove in which the mitre guide slides and there is an additional tenoning guide (Stock Number 100415) available for end grain work. For long lengths of material and for added safety we thoroughly recommend the addition of the power feed unit (510365) detailed later in this section. This is easily attached using the very clever quick fit base (800430) that clamps on to the corner of the table casting. The mounting holes for the power feed are tapped into the base, thereby removing the need to drill holes in the table. A 20A supply is recommended.
The optional sanding set (100391) is supplied with 1off each abrasive to suit.