• Direct driven by 2.2kW motor (may require 16A supply) • Twin cast iron cylinders • 50 litre tank • c/w two wheels and convenient grab handle and female PCL fitting
Axminster AW30HP 3hp Direct Driven Compressor
A compact but powerful unit, featuring twin cast iron cylinders, oil lubricated, ducted air cooled pump, directly driven by a 2.2kW motor. The 50l tank is very quickly re-charged and has a variable pressure regulating valve and gauges for monitoring output pressure and tank pressure. The noise level is noticeably unobtrusive and subdued so should not annoy your neighbours. Very portable as it is supplied with two wheels and a convenient grab handle. Able to drive all air tools except the highest air demanding sanders and spray guns, this is an excellent medium sized machine for most workshop situations, such as garages, joinery workshops, and general woodworking. Supplied with a female PCL fitting.
Axminster AW30HP 3hp Direct Driven Compressor
Model
AW30HP
Free Air Delivered
10cfm
Max Pressure
116psi
Nett Weight
45.5kg
Overall L x W x H
675 x 330 x 669mm
Power
2.2kW
Rating
Trade
Receiver Volume
50l
Supply Requirements
13 Amps
Well built compressor!
"For the price I was a little dubious about the quality of this item. It arrived promptly today (on a next day service at 10am!)
Once I got it out of the packaging, which will take two people as its rather awkward without the wheels on, it was easy to see (and feel) it is extremely well put together.
After I bolted the wheels on, screwed on the air filter and put the oil in (which is supplied) it fired up first time, got to pressure quickly and provided a steady, uniterupted flow at 80psi.
I highly recommend this item to anyone looking to invest in a compressor.
Incidentally we're going to be using it with a suction fed sandblast unit and were told to expect to pay around £350 for a compressor with the features this has!"
- Andy Blackett
first class
"Received the next day, minimum needed for assembly just add the wheels and oil! Good output and quiet."
- Mr paul elliott
Great value
"I also had the fuse blowing problem. I find that I need to start it up from empty each time, and hold the relief valve open for a few seconds when I switch it on, after that it runs fine. Excellent value for the spec, it keeps up well with all of my tools."
- Steve Loft
Fuse Problem
"Note to Axminster - I gave this 5 stars because it works well and is a good price. However it gets minus 5 for the bother I had sorting it out and you owe me a dozen fuses."
- Mark Saunders
If you need a compressor buy this
"Great Value, arrived next day. Has not blown my fuses, if it blows yours I suggest you make friends with an electrition, there is nothing wrong with the compessor. If I was looking for a petty niggle I would have liked a direct out avoiding the regulator. But that can be ignored, its great value."
- Anonymous
AW30HP COMPRESSOR
"GREAT COMPRESSOR.FOR MONEY.
HAS NOT BLOWN MY FUSES STARTS UP ANY TIME WEATHER AIR IN TANK OR NOT."
- Mr KEITH MONTAGUE
Very very good
"It is not blowing my fuses, full with air or not.
Plugged it in and it worked first time! Another fine Axminster buy."
- Mr barry broad
Recommended but...
"I agree with all the other comments. Excellent VFM. Plenty of power. Unfortunately the comments about the mains supply are spot on. My whole workshop is fed from a 16A MCB on the main board. This compressor trips it 2 out of three startups - only thing that ever has (damn nuisance - I've ordered a surge current limiting thermistor - hope it works!)."
- Mr Mike Parkin
16A supply recommended
"Based on my experience I would say that a 16A supply is definitely required. As others have indicated it has a voracious appetite for 13A fuses if you try to run it on a square pin plug. Once on a 16A line its happy and works well _provided_ you don't try to start it from cold with a partly full tank. In this situation it is prone to stall and pop its trip. The lesson here is to read the instructions and always empty the tank at the end of each session. That gives the motor an easier ride when the pump is cold and allows it to warm up with minimum load. Once warm its perfectly happy and supplies plenty of air for all bar the most greedy tools.
For the money, this compressor is excellent, but it shouldn't really be sold with a 13A plug. If it was sold with a 16A plug the motor could be upgraded to handle the cold start problem.
Hence 4 stars."
- John
Needs 16amp supply in some areas
"Its a very good value item but beware I have had to return mine as it blows 13amp fuses immediately. You may need a 16 amp supply."
- Anonymous
Axminster Power Tool Centre Ltd, Unit 10 Weycroft Avenue, Axminster, Devon, EX13 5PH. United Kingdom. VAT Reg. No. GB 792 4137 16. eCommerce by Paraspar
