Axminster Large Drum Sanders

Following on the success of the drum sander bobbin set we have sourced these two king size bobbins with which to make your own sanding devices. Mounted vertically in a drill press or drill stand they make, with the addition of some simple woodwork, an excellent bobbin sander. Alternatively, mounted on to the end of a small motor or in the lathe, an excellent contour sander with endless applications. The bobbins use 150mm wide abrasive strip, held and tensioned in place with an elliptical locking key. Available in two sizes, 65 x 150mm or 76 x 150mm, supplied with 100g loading and 12.7mm(1/2") male shaft (held in place with a grub screw) which may be withdrawn leaving a 16mm(5/8") hole 31.75mm(1.1/4") long - suitable for most small 240V motors. Please note - maximum rotational speed is 1500rpm.