CMT Reverse Glue Joint Cutter

Used for joining boards together to produce wider panels. With the ability to handle stock thickness from 30mm to 15mm, this cutter is most suitable for producing cabinet door fronts and table tops.
The wood needs to be accurately centred to the cutter in order to produce accurate joints requiring the minimum of finishing. Adjust the cutter height so that the centre of the timber lines up exactly with the centre point of the cutter. This should result in the upper and lower vertical cut edges of the timber being of equal size. Run one edge of the wood through the cutter, turn the piece over and run the other edge for an exact reverse cut that matches up perfectly. Assemble the reverse cut pairs together for a strong, good-looking joint.