Axminster Quick Action Bench Clamps

Sold as a set of four clamps, they are the perfect companion to the Workmate or similar. Fitting neatly into any of the holes that are pre-drilled in the work tops, the ABS threaded bodies pass through accepting their matching quick nuts to the rear. These quick nuts are adjusted by squeezing two lugs on the nuts until the clamps are in place. The quick clamps are perfect for holding virtually anything down to the top of the bench surface locking them finally in place with the over centre cam ingeniously positioned on top of each clamp. If the pressure is not sufficient, back the cam off and tighten the nut underneath until adequate pressure is achieved.