• 610mm crosscut capacity • 920mm of rip capacity • 110mm depth of cut • Blade brake • Supplied with a 32 tooth TCT blade and legstand
DeWalt DW728K and DW729K Radial Arm Saws
This radial saw has a 610mm crosscut capacity, 920mm of rip capacity and 110mm depth of cut. Solid cast iron arm machined to provide arm tracks with no inserts, increasing accuracy and life. The machine has a blade brake and automatic safety return on the blade. Quiet maintenance free induction motor delivers high power even when cutting at the maximum capacities of the machine. Simple yet positive controls and adjustment scales enable the width, depth and angle of cut to be set with accuracy in seconds. Supplied with a 32 tooth TCT blade and legstand. Available in single phase, 240V (DW728K) or 3 phase, 415V (DW729K).
DeWalt DW728K and DW729K Radial Arm Saws
Model
DW728K(240V)/DW729K(415V)
Blade Speed
2,800rpm
Max Crosscut @ 45deg
445mm
Max Crosscut @ 90deg
610mm
Max Depth of Cut @ 45deg
75mm
Max Depth of Cut @ 90deg
110mm
Max Ripping Width
920mm
Mitre Angle Range
0 - 45°
Nett Weight
149kg
Overall L x W x H
1,760 x 1,170 x 1,370mm
Power
2.2kW(240V) - 4.0kW(415V)
Rating
Industrial
Blade Dia/Bore
350mm/30mm
not for the faint hearted
"Nice robust machine, once set up should provide reliable service.
Maybe a little too heavy for some users, pick a smaller unit if you do not need capacity.
Watch out for heavy blade guard marking your nice clean timber!!
You will also need access to rear of machine to adjust rise and fall unless you have extra long arms!"
- Mr kevin hallsworth
Axminster Power Tool Centre Ltd, Unit 10 Weycroft Avenue, Axminster, Devon, EX13 5PH. United Kingdom. VAT Reg. No. GB 792 4137 16. eCommerce by Paraspar
