• Constructed almost entirely of cast iron with ground, hardened bed ways • Fully featured saddle and carriage assembly • Powered leadscrew • Supplied with, 80m 3 jaw chuck, 2MT centre, change wheel set, wrench set
Axminster SIEG C2A 300mm Mini Lathe
A top quality bench lathe which is just about portable at 37kg. Constructed almost entirely of cast iron with ground, hardened bed ways, a fully featured saddle and carriage assembly, a tailstock with spindle taper turning capability and a variable speed spindle drive through a 2 speed gearbox, giving a speed range of 100-2500 rpm. A powered leadscrew with a change wheel set gives metric thread range of 0.4-2.0mm pitch (Cutting imperial threads 12 to 52tpi requires the optional imperial conversion kit part number 600699). The C2A is supplied with an oil tray, splash guard, 3 jaw self centering chuck, electrically interlocked chuck guard, change wheel set, 2MT centre and wrench set. A special feature is the standard fitted digital readout for easy, precise measuring of the tool post X & Y travel. An excellent choice for the enthusiastic model engineer or possibly school use. Maximum 8mm shank tooling.
Axminster SIEG C2A 300mm Mini Lathe
Model
SIEG C2A
Centre Height
90mm
Cross Slide Travel
65mm
Distance Between Centres
300mm
Taper Headstock
3MT
Spindle Bore
20mm
Nett Weight
37kg
Overall L x W x H
720 x 300 x 290mm
Power
250W
Rating
Light Trade
Spindle Speed
100-1,100rpm low range, 200-2,550rpm high range
Taper Tailstock
2MT
Max Diameter over Bed
180mm
SIEG C2A
"Suprisingly solid for a small hobby type lathe. Much better value than other importers versions of the same lathe. Straightforward to clean and set up. Reasonably accurate. Caveats and annoyances? Some cosmetic damage upon receipt despite good packaging, probably a factory issue. Note that the DRO indicates the amount of turn applied to the compound feed screws and not the actual tool position, due to backlash. Tools prone to chatter, take light cuts. Note that lathe comes without thread dial indicator, you need to buy this separately. What really bugs me? Axminster like other UK importers don't supply a carriage stop or a carriage lock as an accessory, you have to make your own or buy from America, which means that repetitive turning to a shoulder is a pain."
- Mr Paul Jenkins
sieg c2a
"also surprisingly heavy. living in a flat arrived in wooden case at 50kg requiring two men for delivery due to HSE regulations so if youre unable to assist beware."
- Mr A Gordon
Axminster Power Tool Centre Ltd, Unit 10 Weycroft Avenue, Axminster, Devon, EX13 5PH. United Kingdom. VAT Reg. No. GB 792 4137 16. eCommerce by Paraspar
