Toolmaker's Vee Block

A universal vee block for mounting circular items when machining or marking out. The clamp is slightly narrower than the block, allowing the block to be laid on its side for machining features at right angles to each other. There is an adjustable stop fitted to the clamp screw which can be positioned so that it rests on the machine table to give additional support when machining with the block on its side. There are holes tapped in the base and the sides of the block for securing to angle plates, faceplates or other fixtures. Overall sizes are 47mm wide, 47mm high and 88mm long and maximum diameter with the clamp is 32mm.