• 38mm long brass roller spreads the load across your stone • Roller assembly easily removed, use the holder on a bench grinder • Alignment lines for setting blade square
Axminster Deluxe Honing Guide
Two special features turn this from a humble honing guide into a deluxe model. Firstly, the roller assembly can be easily removed, allowing the jig to be used in conjunction with a bench grinder and, secondly the brass roller itself is 38mm(1.1/2") long, so no worries about it wearing a groove in your stone. On the upper surface a series of lines enable the blade's squareness to the jig to be easily checked. We found a blade projection of about 38mm(1.1/2") gave a good bevel angle.
Pretty Decent buy
"Fantasit piece of equipement. Well built and holds the blades rock solid. Will be very usefull to have one to keep you tools sharp and neat."
- Mr Andrew Babu
Useful gadget
"Does what it says and very well. The long plate gives good support to long tools and blades but can be a problem with shorter chisels for which you'd be better off with the cheaper guide that clamps to the blade."
- Mr Graham Lewis
works great but difficult to setup
"It works great once you have setup the chisel, which can be a bit of a hassle.
It saves my fingertips from burning.
Short and small chisel might be a problem"
- Mr Hubert-Jan van Eijk
Axminster Power Tool Centre Ltd, Unit 10 Weycroft Avenue, Axminster, Devon, EX13 5PH. United Kingdom. VAT Reg. No. GB 792 4137 16. eCommerce by Paraspar
*Normally price refers to the price published in our 2010 Tool & Machinery Catalogue.
