Trade rated combi hammer drill and driver High quality keyless chuck 2 x 2.4Ah NiMh batteries LED battery charge indicators 17 torque settings for efficient screwdriving Comfort grip Electric braking on trigger release 2 speed all steel planetary gearbox
Axminster AW180CD Cordless Combi Drill 18V
A great tool for domestic and trade use. Engineered throughout for long service life and to deliver plenty of torque for all types of fixings, including masonry. Supplied complete with two batteries, carrying case and charger.
Axminster AW180CD Cordless Combi Drill 18V
Model
AW180CD
Battery No/Capacity
2 x 2.4Ah
Battery Voltage/Type
18V NiMh
Charge Time
1 hour
Chuck Cap/Type
13mm keyless
Max Cap Masonry
16mm
Max Cap Steel
10mm
Max Cap Wood
25mm
Nett Weight
1.8kg
Rating
Light Trade
Speed
0-400, 0-1,150rpm
Torque and Settings
19Nm - 17
AW180CD
"I have had this drill for nearly 2 years & can find no reason to fault it in that time, for the money a good product "
- Mr steve reeder
Mr Gary Saunders
"I dont know what the fuss is about when they tell you to buy good brand names, this drill has been fantastic for over 2 years and is still as good as when I got . Absolutely brilliant!"
- Mr Gary Saunders
AW 180 CD
"I have 2 of these drills which are used daily and as far have not let me down after around 18 months. One has dropped from the top of a ladder and still performs."
- Mr Julian Finch
Martin Soffe
"Have found drill stalls when using 12mm bits into walls, difficulty in tightening chuck, not enought to hold of the locking piece and trigger has to be pushed past the plastic shroud to get full speed.Not really the quality that I expected.Good powerful batteries though."
- Martin Soffe
Mr A. Roy
"Not a good drill. I'm Trade and I bought it for light all round usage, having a Makita for heavier work. First problem was the hammer function selector screws came loose in the middle of a job and started grinding on the back of the chuck and I had to fix it there and then. A more serious problem occurred some months later when the hammer function spring wound itself out around its retaining flange. Again in the middle of a job. Had to be fixed immediately as there was no backup drill available. It has since done the same again which means the hammer function stays on all the time. Batteries good though. "
- Mr alex roy
Axminster Power Tool Centre Ltd, Unit 10 Weycroft Avenue, Axminster, Devon, EX13 5PH. United Kingdom. VAT Reg. No. GB 792 4137 16. eCommerce by Paraspar