• Beechwood construction equipped with heavy duty 30mm top • 490 x 1,500mm worktop • Full width 150mm tool well • Two wooden vices (305mm and 420mm) with central screw and twin support bars • 12 dog holes for clamping longer lengths with the tail vice • Underslung 450mm long drawer and full width shelf
Axminster Medium Duty Bench
A traditionally designed beechwood bench equipped with heavy duty top, tool well at rear and two wooden vices with central screw and twin support bars. Built to the same high standards as the larger benches but, being smaller in overall size, will fit more easily into the domestic workshop. The frame members are 35mm by 80mm, the top is a substantial 30mm thick with 90mm deep edgings and there is a total of 12 dog holes for clamping longer lengths of timber with the tail vice. The overall width of the working surface is 490mm, including a tool well of 150mm.The end vice is 305mm wide and the front vice 420mm, giving plenty of holding width for large pieces of timber. Tool storage is catered for by an underslung drawer, 450mm long, and a full width shelf. The bench is supplied flat packed so home assembly will be required.
Axminster Medium Duty Bench
Model
Bench 2
Apron Depth
90mm
Nett Weight
76kg
Overall L x W x H
1,500 x 720 x 850mm
Thickness of Top
30mm
Medium Duty Bench
"Very solid bench at 70kgs. Assembly Instruction consisting of line drawings quite poor. The picture of the assembly shows the leg supports wrong way round. The narrower part of the cross member should face the rear to engage the tool well.
The drawer is made of cheap chipboard and when mine was delivered the back had separated from the sides, quite disappointing when compared to the quality of the bench. One call to APTC and I was promised a replacement with no fuss."
- Mr C Musson
Review
"As for previous reviewer, incorrect assembly instructions, broken drawer (cheap and nasty) but very good bench. I also had 4 washers missing that were shown in the instructions, although with the incorrect instructions who knows if they should have been there or not? Shame to spoil a very good banch with these small annoyances, especially as they couldn't have saved much in the way of cost. Dave."
- Anonymous
Axminster Power Tool Centre Ltd, Unit 10 Weycroft Avenue, Axminster, Devon, EX13 5PH. United Kingdom. VAT Reg. No. GB 792 4137 16. eCommerce by Paraspar
