• Compact, light trade rated machine of steel and cast iron construction • Rigid body construction allows high blade tension • Two speed • Ball bearing blade guides top and bottom • Quick locking rip fence • Doors fitted with micro switches • Supplied complete with cabinet, enhanced rip fence and mitre fence • Overall height 1,420mm
Axminster AWSBS2 Bandsaw
The Axminster AWSBS2 two speed bandsaw comes complete with floor standing cabinet, enhanced rip fence and mitre fence. Fabricated from sheet steel with cast iron table and alloy wheels, the bandsaw has several features usually only found on bigger machines. The stiffness of the steel fabrication allows the blade tension to be much higher than most bandsaws of this size which helps to reduce blade vibration. The blade is well supported with ball bearing guides both above and below the table. Unusually in a bandsaw of this size the back edge of the blade runs on the face of the rear thrust bearings rather than the side. The cast iron table has a groove in which the mitre fence slides and is fitted with a rigidly clamped extruded aluminium rip fence. Both doors are fitted with micro switches so that if someone was tempted to open a door whilst the machine is in use then the motor will cut out.
Axminster AWSBS2 Bandsaw
Model
W26 - HBS450N
Blade Length
1,790mm(70.1/2")
Blade Speed
660 & 960m/min
Blade Width Min/Max
6mm(1/4")/13mm(1/2")
Dust Extraction Outlet
63mm
Max Width of Cut
245mm
Max Depth of Cut
120mm
Max Width of Cut with Fence
145mm
Nett Weight
43.5kg
Overall L x W x H
420 x 410 x 1,500mm
Power
350W
Rating
Hobby
Table Height
368mm
Table Height on Stand
990mm
Table Size
335 x 340mm
Table Tilt
Left 0 - 5° Right 0 -45°
Wheel Diameter
225mm
Amazing value!!
"This really is amazing value for money. Don't expect it to be perfect, but for the price I was totally impressed. Motor could do with being a bit more powerful and the mitre fence is pretty useless but for £125 I reckon you cant go wrong. Oh and the size isnt right on the specs - because of the table it is about 52cm wide, not 42. "
- Anonymous
AWSBS2
"Great value for money. I had a little trouble getting the blade to run true, but once set up ( it was probably me! ) it a great little piece of kit. Well worth it."
- Anonymous
Axminster AWSBS2 Bandsaw
"Great, tricky to adjust/set up with all those rollers, good fence, Overall fine smaller machine.
Excellent value"
- Mr Colin North
Great value small bandsaw
"For the money I think this is very hard to beat. Setting up can be a fiddle but once you get the knack changing blades is easy enough that you can do it in minutes. I have had the previous model for longer than I remember and used it for everything from cutting tennons to ripping 8 foot lengths of 6x2 down to 3x2 (take it slow and buy some roller stands beforehand!). Quick tip to set the rip fence: use a steel rule and measure from the mitre fence slot to get parallel to the blade. My only regret is I didn't buy one years before i did!"
- D WATSON
AWSBS2
"only used it a few times, it is great value for money and it fits in the corner of the shed. Dont forget to order spare blades like i did."
- Mr julian davies
awsbs2
"have the model previous to this one, (without the cabinet),still the same quality machine, but even more value for money, top buy !!!!"
- Mr robert scullion
awsb2
"A Great bit of kit for the small workshop. The only gripe I had was trying to fathom out how to secure the rip fence properly. But apart from that ITS Great wondered how I managed without it for so long."
- Mr paul smith
Mr Royston Whiting
"Agree with prevoius comments, rip fence fiddly to set, blade tracking took a time to set up. Received with plastic end cap on top smashed but another sent next day...not sure if this transit damage affected the line up. However, machine runs sweetly after the running in period. Generally well pleased and the cupboard base could be shelved out for good tool storage area."
- Mr Royston Whiting
Not enough OOMPH !!!
"On the face of it a good value specification and a soundly constructed piece of machinery with a handy cabinet
However the paint finish of the machine was poor and after use with a variety of blade types and timber sizes I have concluded that the motor size is not adequate for the size of timbers the throat can accomodate.
This machine would benefit from a larger motor"
- Mr Peter Hamer
Axminster Power Tool Centre Ltd, Unit 10 Weycroft Avenue, Axminster, Devon, EX13 5PH. United Kingdom. VAT Reg. No. GB 792 4137 16. eCommerce by Paraspar
