• Simple no volt release switch - controls power on or off • Supplied with mounting box and two cable glands • Capable of switching up to Max 2,000W with no volt release protection • Push on terminals • 80 x 115 x 60mm deep • Four fixing holes on 45 x 75mm centres
Axminster NVR Switch
A simple no volt release switch complete with mounting box and two cable glands capable of switching up to 2kW 240v with no volt release protection (not overload protected). Due to the build of this switch it is not suitable for use with additional safety switches and can only be used to control the power simply on or off. The switch uses push on terminals as supplied in our kit STC175, with mains supply in on terminals 1 and 3 and power out on terminals 2 and 4. Only persons with competent knowledge of electrics should fit these switches. Size 80mm x 115mm x 60mm deep with four fixing holes on 45mm x 75mm centres.
Axminster Power Tool Centre Ltd, Unit 10 Weycroft Avenue, Axminster, Devon, EX13 5PH. United Kingdom. VAT Reg. No. GB 792 4137 16. eCommerce by Paraspar
