• Trade rated mitre saw with quiet, braked induction motor • Slide action gives 290mm wide by 61mm deep cutting capacity • Aluminium base with 9 preset mitre angles • 290mm wide x 61mm deep capacity • Material clamp • Supplied with general purpose TCT saw blade, material clamp and service tools
Axminster QMS254I 254mm Quiet Slide Mitre Saw
The outstanding feature of this saw is its induction motor which dramatically reduces the noise level, a very important factor when working in noise sensitive areas. Also, there is an electronic brake fitted to the motor which brings the blade to a halt in less than three seconds, giving great benefits in both working efficiency and safety. The base of the saw is cast from aluminium and has nine preset angles as well as a clear indication of the 31.6° angle used for cutting coving. The saw pulls out on dual guide bars to give a 290mm wide x 61mm deep capacity, superb for shelving, deep skirting and other mouldings. The saw is supplied with a general purpose TCT saw blade, material clamp and service tools. Although designed for bench mounting, the saw could be mounted on the Axminster Mitre Saw Stand (200087) with the aid of a plywood or MDF sub base.
Axminster QMS254I 254mm Quiet Slide Mitre Saw
Model
QMS254I
Bevel Angle Range
45°-0
Dust Extraction Outlet
32mm
Electric Brake
Yes
Max Bevel Cut @ 45deg
42 x 290mm
Max Compound Cut @ 45deg
42 x 210mm
Max Mitre Cut @45deg
61 x 210mm
Max Crosscut @ 0deg
61 x 290mm
Mitre Angle Range
45°-0-45°
Nett Weight
22kg
Power
1,600W
Pre-Set Mitre Angles
0°,15°,22.5°,30°,45°
Rating
Trade
Blade Dia/Bore
254mm/30mm
Slide mitre saw
"Quiet, accurate, excellent finish and well made. After looking at some cheap saws I'm glad I decided to spend a bit more on this one."
- Anonymous
Improve the dust extraction!
"Yep it's quiet and solid. A couple of niggles -
1) the dust extraction is poor, i t could do with another hose connector on the blade casing itself. The one just beneath the slide rails is too far away to be effective
2) Tilting the saw over could be easier. The way my bench is set up, the clamp screw gets in the way."
- Mr roger walker
Axminster Power Tool Centre Ltd, Unit 10 Weycroft Avenue, Axminster, Devon, EX13 5PH. United Kingdom. VAT Reg. No. GB 792 4137 16. eCommerce by Paraspar
*Normally price refers to the price published in our 2010 Tool & Machinery Catalogue.
