• Support bars can be used vertically or horizontally • Large handle for portability • Rubber feet keep machine steady and minimise vibration • Honing wheel brings up razor sharp polished edge • Grinds and sharpens most edge tools • For woodworking tools, woodcarving, knives, scissors etc. • Excellent package of accessories included with grinder
Jet JSSG-10 Wetstone Sharpener
The lower portion of the stone runs in a bath of water. As the stone revolves it carries the water continuously over the grinding surface, thus cooling it and eliminating the risk of overheating. The grindstone runs at 90 - 150rpm, driven by a compact powerful 160W powerful motor. Motor speed is controlled by a variable speed switch. When the grindstone diameter is 250mm, run the grinder at the lower 90rpm setting. Over time with constant use the grindstone will wear, the speed can be increased to compensate for this, so maintaining the optimum surface speed at all times. The Sharpener includes: a Stone Grader, applying this changes the stone from coarse to fine and back again, a Straight Edge Jig for hand plane blades and chisels, an Angle Setting Jig, for precise repeatability, a Bevel Angle Measuring Device, to measure the existing bevel angle of your tools, a tube of Honing Compound for that final polished edge, the support arm to carry the jigs and adjust the angle of attack and an instructional DVD.
Jet JSSG-10 Wetstone Sharpener
Model
JSSG-10
Grit
250g
Nett Weight
10.5kg
Overall L x W x H
406 x 305 x 330mm
Power
Input 160W
Speed
90-150rpm
Wheel Diameter
250mm (12.7mm bore)
Wheel Width
50mm
Jet Wetstone Grinder
"A quality machine, built to last longer than a lifetime. you will not be disappointed if you give one of these machines workshop space. The grinder runs very quiet and smooth and is a joy to use. I've never had my cutting edges so sharp. I bet you can't find the proper home for the Bevel Angle Measuring Device!"
- Mr Alan Smith
Jet Wetstone Grinder
"Agree with the previous review.10-15 mins with chisels and plane iron, square, sharp and as the DVD shows you can give your arm a shave. Placed the order 6.00pm and it was delivered 1pm the following day to N Ireland.5 stars to Axminster and Peter as always."
- Mr George Deaney
Jet Wetstone Grinder
"This wetstone grinder does the job well. Just a shame that most of the necessary jigs are extras. Only one basic jig is supplied with the machine. Unfortunately you have to lean over the rotating wheels to operate the on off switch at the back. It would be safer to locate the on off switch at the front."
- Mr Vaughan Whiteley
Axminster Power Tool Centre Ltd, Unit 10 Weycroft Avenue, Axminster, Devon, EX13 5PH. United Kingdom. VAT Reg. No. GB 792 4137 16. eCommerce by Paraspar
*Normally price refers to the price published in our 2009 Tool & Machinery Catalogue.
