The 120 x 220mm milled table is fitted with a fence and a scale. The solid column is chrome plated and the headstock is of die-cast aluminium, offering a throat capacity of 140mm and 30mm travel. A chromed feed lever operates via a drive disc and ball-bearing system, offering a sensitive feed set-up. T-bars allow simple height adjustment as well as the fixing of the mill drill in the 20mm bore fitting. The mill drill collar, with scale, tilts through 90° in both directions. The drill stand features a depth stop as well as drilled, tapped holes for securing the KT 70 Compound Table. The MS 4 Machine Vice can also be fitted, it is made of die-cast zinc with three machined sides and horizontal and vertical V-slots in the jaws. Jaw width 50mm and height 10mm. Maximum clamping width 34mm.
28 March 2017
Great for the moneyI use my drill presses all the time. One is very accurate when used in conjunction with the compound table that I have permanently screwed in place (holes already provided) to ensure rigidity and precision. If I want to make a few quick holes I use a vice on my other press, not the cheap and cheerful, entry level MS4 though, I upgraded to the next in the Proxxon range. All good I reckon..
Martin G Nash
28 May 2015
Proxxon MS4 vice does not secure properly to either the table or the fence barTerribly disappointed with this; my first purchase from Axminster. I asked about the method of securing the vice to the fence before ordering as I couldn't see how lateral movement on the fence was prevented - it seemed to just sit there; it does!
10 September 2009
Proxxon MICROMOT MB 140/S Drill StandI notice the words "precision" and "accurate" are missing from the description. Quite right too.