• Incline setting on both sides up to 47° on the front of the machine for easy and convenient angle settings • Handle with Softgrip can be locked conveniently in 4 positions • Integrated bench extensions that can be set without tools • 1,800W motor for the hardest of jobs • Large cutting capacity, up to 85 x 305mm • Mitre angles up to 60° on the right are possible • Two carrying handles with Softgrip for convenient transport • Spindle lock for convenient changing of saw blades • Supplied complete with 60T TCT sawblade, quick action clamp and dust bag with adaptor
Bosch GCM 10SD 254mm Slide Mitre Saw
This Bosch compound mitre saw gives precise repeat settings with easy adjustments and powers through hardwood with ease. Full capacity, easier flat crown cuts, full work support and cleaner work area using two slide base extensions. This machine is ideal for applications such as cutting parquet and laminates, beams, grooves, mitre cuts, bevel cuts and compound cuts. The Softgrip handle can be locked conveniently in 4 positions for maximum operating comfort. Ten pre-set locking positions with mitre angles up to 60° to the right and 52° to the left. Supplied complete with 60T TCT sawblade, quick action clamp and dust bag with adaptor.
Bosch GCM 10SD 254mm Slide Mitre Saw
Model
GSM10SD
Bevel Angle Range
47°L/46°R
Dust Bag
Supplied
Dust Extraction Outlet
40 - 52mm
Max Bevel Cut @ 45deg
50 x 305mm
Max Compound Cut @ 45deg
50 - 216mm
Max Mitre Cut @45deg
85 x 216mm
Max Crosscut @ 0deg
85 x 305mm
Mitre Angle Range
52° - 0° - 60°
Nett Weight
28kg
Overall L x W x H
860 x 640 x 690mm
Power
1,800W (240V) - 1,450W (110V)
Pre-Set Mitre Angles
10
Rating
Industrial
Spindle Lock
Yes
Blade Dia/Bore
254mm/30mm
Good value, very capable mitre saw
"This is a good deal especially with the stand. The saw is well made although I found the fence wasn't exactly square to the table. Plus trench cuts are only for rough work - there's too much flex in the bars for anything really accurate. I think most SCMS's suffer with this.
But the other features of the saw make up for any deficiencies. The stops are accurate; the controls for the bevel settings at the front are handy; the hold down is very capable (but a little awkward to use); the built in extension tables are great and flat to the table. Even the adjustable handle is good. And most importantly it does what it's supposed to do, with ease and it's accurate.
Beware - it's massive and heavy so make sure you have room in your workshop!
The stand is well made too. but again heavy and it's tricky mounting the saw on it. But still very useful for outside work particuarly."
- Anonymous
Bosch GCM 10SD (with Bosch Legstand)
"I think I compared just about every SCMS on the market before eventually biting the bullet and buying the GCM10SD. Have to admit some reviews had been a bit off-putting especially re. weight and accuracy. There's no mistaking, it is heavy and BIG. However, with a little trial and error you find the best way to carry it. Once set up on the legstand it's a joy to use - and I leave the legstand brackets attached all the time so it's a simple matter to just drop it back onto the stand and lock in place.
Regrets? None - but bear in mind it's not the saw to choose if you want to be continually carrying it around from room to room but it is ideal for setting up in one position for the day."
- Anonymous
Axminster Power Tool Centre Ltd, Unit 10 Weycroft Avenue, Axminster, Devon, EX13 5PH. United Kingdom. VAT Reg. No. GB 792 4137 16. eCommerce by Paraspar
*Normally price refers to the price published in our 2010 Tool & Machinery Catalogue.
