Suitable for vertical mounting in drill press or drill stand Can also be mounted on the lathe producing an excellent contour sander Uses 150mm wide abrasive strip Available in two sizes
Axminster Large Drum Sanders
Following on the success of the drum sander bobbin set we have sourced these two king size bobbins with which to make your own sanding devices. Mounted vertically in a drill press or drill stand they make, with the addition of some simple woodwork, an excellent bobbin sander. Alternatively, mounted on to the end of a small motor or in the lathe, an excellent contour sander with endless applications. The bobbins use 150mm wide abrasive strip, held and tensioned in place with an elliptical locking key. Available in two sizes, 65 x 150mm or 76 x 150mm, supplied with 100g loading and 12.7mm(1/2") male shaft (held in place with a grub screw) which may be withdrawn leaving a 16mm(5/8") hole 31.75mm(1.1/4") long - suitable for most small 240V motors. Please note - maximum rotational speed is 1500rpm.
Axminster Large Drum Sanders
Height
150mm
Versatile sander
"Very useful deep drum sander to mount in bench drill. Easy cam grip loading of abrasives would be 5 star but not quite up to the Carol sanders I have but no where near the price."
- Mr John Swan
No instructions.
"No instructions for changing sandpaper."
- Mr Michael Golding
Axminster Power Tool Centre Ltd, Unit 10 Weycroft Avenue, Axminster, Devon, EX13 5PH. United Kingdom. VAT Reg. No. GB 792 4137 16. eCommerce by Paraspar
*Normally price refers to the price published in our 2009 Tool & Machinery Catalogue.