The H5 Panel Saw offers full-sized vertical panel saw productivity in an economical machine. It cuts within 0.8mm(1/32") on a wide variety of panel materials up to 44.5mm thick, and has a crosscutting width of 1,625mm. Vertical operation makes handling of the sheets much easier as well as saving valuable floor space. The saw can be secured permanently to a wall or moved around with the aid of the optional wheels and either the fixed or the folding stand. The saw unit with its 44.5mm depth of cut and 1,600W motor is fixed to a mounting plate which slides up and down the two guide bars, supported by a spring recoil device. Vertical cuts are made by positioning the sheet in the correct position on the frame and moving the saw blade down through the sheet; horizontal cuts are made by rotating the saw unit through 90°, locking it in the correct vertical position and moving the sheet through the blade. Rollers on the lower rail ease the passage of the sheet through the saw and there are wheeled extensions available for the bottom rail to allow 3,050 x 1,625mm(10' x 5') sheets to be safely processed. The actual rip cut capacity is unlimited.
The saw comes fitted with a mid-way fence which makes the handling of narrower width boards much more convenient. The two horizontal timber supports on the mid-way fence are secured in place with quick release cam clamps which allow the supports to be removed in a few seconds when full depth sheets are to be cut. The mid-way fence is fitted with a precision stop for accurate repeat length cutting.
Other accessories available are: (a) a sliding dust extraction kit with a 6.5metre hose which slides over the rollers at the top of the machine as the saw moves up and down, (b) a multiposition length stop which allows for up to eight pre-set lengths to be set and (c) a hold down bar with support fingers and non marring rollers for use when cutting thin materials such as Perspex. H-Series saws are used in all kinds of panel processing applications.
A fine toothed blade is now supplied as standard with the saw. An additional blade suitable for cutting non ferrous materials is also available.When ordering this saw for shipment to offshore islands or overseas you must purchase the fixed stand (110074) to enable the item to be sent safely.
|Max Depth of Cut||44.5mm|
|Overall L x W x H||3,050 x 915 x 2,286mm|
|Blade Diameter||205 mm|