Check our opening hours for the festive season
Win a Gift Card every day until 12th December!
Visit your local store, we have lots of events planned this month
Our fence improves safety and accuracy when cutting or sanding and makes it easy to cut perfect mitres quickly.
The protractor head features positive stops at 0°, 22.5°, 30°, 45°, 60°, 67.5° and 90°, both left and right. This gives you 13 pre-set common angles in total. The clear easily read scale allows you to set the head to any intermediate angle. To select an angle you simply loosen the clamp handle and lift the indent plunger. Move the fence along until the plunger seats itself in the indent corresponding to the angle required. Re-tighten the angle clamp knob and carry on with the job.
The bar is 320mm long with a removable locking washer making it usable with any standard 19 x 9.5mm (3/4" x 3/8") track or similar sized T-slot. Three sprung loaded ball bearings keep the bar snug in the track; the fence runs true without side-play.
The rugged 300mm long, 60mm high aluminium fence comes complete with flip-up length stop.
4 August 2016
Good piece of well manufactured kit.I bought this mitre fence at the same time as a hobby series bandsaw. It is much more accurate than the bog standard fence that comes supplied with most bandsaws; is very easy to adjust with much improved graduations; the preset angle works vey accurately and the flip over stop is indispensable when cutting repetative lengths. It also works well with a router or table saw. It glides well in either a cast iron or alloy table which also improves safety. Well worth the cost.
28 July 2016
UJK TECHNOLOGY COMPACT MITRE GAUGE & FENCEIt is not a solid steel protractor head, it is aluminium. Mine came without any of the small ball bearings, but this was remedied quickly by post.
1 July 2016
great product only at the reduced thoughhas many great little features ensuring you can get a very secure wobble free mitre fence working on your router table or bandsaw. absolute steal when axminster has this on offer. solid, good weight with finite adjustment when needed
26 February 2016
Expensive but nicely put togetherOriginally purchased with the UJK router table it's also seen action on the bandsaw. Angle stops have a good positive action and the sprung loaded ball bearings are easily adjusted with allen key grub screws to give a straight and steady slide.