Package comprises the UJK Technology Dovetail Jig and the Axcaliber Jig Dovetail Cutter Sets with either 8mm or 1/2" shank.
UJK Technology Dovetail Jig
The UJK Technology Dovetail Jig can be used to cut half blind dovetails for drawer construction, as well as precise comb or finger joints which could be used, for example, in utility furniture. It will also cut through dovetails, which would be ideally suited for a project like a toolbox.
This tool is robustly made from heavy gauge, 3.5mm steel pressings and is very simple to set up and use. Fitted with cam action clamps, the workpieces are held quickly and securely while the smooth anodised finish on the 6mm thick, machined finger template ensures that both parts of the joint are cut accurately and cleanly. The jig can be used with any router that will take 1/2" or 8mm shank cutters. It also has a pre-set router depth adjustment knob as well as a unique stabiliser bar located in front of the comb, which provides a much greater surface area on which to bear the router base. A matched pair of Axcaliber cutters (7° dovetail/straight) and an additional Leigh guide bush adaptor to suit the router should also be purchased. Finger joint 10mm width, length maximum 25mm
The UJK Dovetail Jig also incorporates a 62mm dust extraction port to aid safe and efficient operation. Supplied with 2 x 6mm thick aluminium combs, American style threaded guide bush as well as full instructions. Material capacity: 300mm width, 6–28mm dovetail thickness.
Axcaliber Jig Dovetail Cutter Sets
These are a pair of matched cutters, one parallel and the other with a 7° dovetail slope. The pair can be purchased either with an 8mm or 1/2" shank and are intended to be used with the UJK Dovetail Jig. The cutting length of the straight cutter is 26mm and the dovetail measures 19mm.