Check our opening hours for the festive season
Win a Gift Card every day until 12th December!
Visit your local store, we have lots of events planned this month
The UJK Technology mitre slot bar is a solid aluminium section designed to fit the standard 19mm mitre slot in your machine table. Overall dimensions are 457 x 9.5 x 19mm wide. There are four grub screws spaced equally along the length of the bar to fine tune the sliding fit of the bar in your machine table slot. Three 1/4" whitworth threaded holes are spaced equidistant along the length to accommodate any jigs and fixtures that you wish to attach. A very useful accessory for either saw tables or router tables where jigs for repeated operations help to speed up the production of machined components. N.B. 1/4" Whitworth bolts will need to be sourced separately.
1 September 2015
Useful item - stupid thread size!Useful item which fits well in the mitre slot and saves messing around planing wood to fit. Little threaded nylon inserts allow for adjustment but are quite stiff. Sourcing Whitworth thread screws is difficult and expensive... much easier to drill some extra holes and tap to M6!
1 January 2015
Well made itemWell made item and the adjusters snug it ip perfectly in my table saw slot, I purchased three and they're currently in use on my table saw sled and my tennoning jig. Great item for at home jig making, I've struggled in the past cutting my own wooden equivalents which have worked fantastically during the season that there made, but cause great frustration when that's the only time of year they can be used! A must have if your a year around wood worker!