- Home >
- UJK Technology Professional Router Table Cast Iron
UJK Technology Professional Router Table Cast Iron
|Dust Extraction Outlet||62 mm|
|Fence Size||904 mm x 90 mm|
26 January 2017
Excellent versatile machineThe old adage, you get what you pay for certainly rings true here. I persuaded my wife to buy me this for Christmas so loaded it with every extra you can get. It is worth following Peter Parfitts videos on youtube to help with the assembly and set up. I also bought the Trend T11 to go with it and thats where the issues started. The UJK elevator base which is a must if you want repeatability only locates with 2 screws so I drilled and tapped the router base to accept another 2 screws. Be very careful not to tighten the screws until you have centred the router in the UJK base, I used the T11 30mm centreing pin and a vernier to get it within 0.1mm. I also had to remove the handles and the router depth stop to allow the base to be wound all the way down. If you don't do this the Axminster collet extension is not easily accessible from the top. A reviewer mentioned vibration with the T11- I had this and it was down to the bearing housing on the T11 being loose! I also cut the excess cable off the T11 so I did not have loads of cable in the extractor box or tied up outside. The elevator I liberally coated with PTFE spray before loading into the table, Like everything else monthly maintanence should keep this going for years. I have pushed some large boards through this and I am really pleased with the result so all in all a worthwhile investment.