UJK Technology Washer Head Pocket Hole Screws Trade Pack

Code: 502479

UJK Technology Washer Head Pocket Hole Screws Trade Pack

Code: 502479

£28.96 (£24.13 Ex. VAT)
  • Save 5% - Buy 2 for £27.50 each
  • Save 10% - Buy 4 for £26.06 each

In stock - get it Wednesday 28th Sep, order within and choose Premium delivery

Click & Collect in store

Check stock at your local store

Click & Collect in store

Chosen store -

Loading stock for

In stock - collect from within 1 hour

Low stock - collect from within 1 hour

Out of stock at

Accessories
Features

Key Features

  • Fine thread screw suits hardwood such as oak, maple, walnut and cherry
  • Coarse thread, suits soft woods, i.e. MDF, melamine, plywood and pine
  • Washer head style provides the largest amount of surface area
  • Seats firmly in the bottom of the pocket, especially for plywood or pine
  • Large washer head screw is not overdriven in the bottom of the pocket
  • Torx T20 heads for the best possible grip
  • Pack 1,000 screws, coarse and fine thread in various sizes

In Detail

An excellent assortment of 1,000 pocket hole screws all neatly contained in a storage case.

All UJK pocket hole screws use Torx drive heads, chosen to provide ease of use and the best grip possible. The washer head style provides the largest amount of surface area to seat firmly in the bottom of the pocket, especially for plywood or pine and ensures that the screw is not overdriven. Silver zinc plated steel (waxed).

The Fine thread screw suits hardwood such as oak, maple, walnut and cherry. The Coarse thread screw provides greater holding power for plywood, MDF, melamine and pine. These hardened screws cut their own thread and are threaded right up to the washer head giving the maximum grab on the screw. The largest washer size (9.7mm) has been used, meaning there is no need to drive the screw through the wood. Use 25mm screws to join 13mm to 19mm thick timber, 32mm screws to join 19mm, 38mm screws to join 22mm to 32mm, 50mm for 32mm to 35mm timber and 62mm long screws to join 38mm thick workpieces. Suitable for use with pocket hole jigs including Kreg®.

Pack contains:

Fine thread

3.5 x 25mm x 100

3.5 x 30mm x 100

4 x 30mm x 100

4 x 35mm x 100

Coarse thread

4 x 25mm x 150

4 x 30mm x 150

4 x 35mm x 100

4 x 50mm x 100

4 x 60mm x 100

N.B. Please remember to always use a drill driver with fitted with a clutch, using the lowest clutch setting required to do the job.

Reviews (2)

Reviews (2)

Features
Value
Quality
Value
Quality
Features

Derek

11 February 2016

Handy pack

Great to have a variety of sizes to hand. Large jobs you would buy a box of one size. Very handy to have in stock
Quality
Value
Features

Alan Cooper

21 February 2013

You want to know what they forgot to say

You will want to know:
Do these have a cutting edge start? YES
Are these better than Trend? YES
Are the Torx heads better than square? YES
Is the metal of these screws very hard? YES
Which should I buy, 30mm x 3.5 or 30mm x 3.8?
I got 100 of each. I found that fixing to edge of mdf tiny cracks would appear 1mm earlier using 3.8, otherwise not a big difference. 3.5 seem adequate strength, both screw well into oak. 3.8 give a marginally stronger fix to oak but not a lot between them using a simple claw hammer extraction test. There is a slightly stronger fix to the screw head on the 3.8 but both are stronger than the fix to the wood, certainly for the 30mm length screws which will not be penetrating further than I would guess 15mm max. I recommend these screws. Make sure you also get a 150mm long torx driver, comes as a twinpack. UJK also do 4.0 gauge but I haven't tried those yet.

Frequently bought with

Alternative options

People also looked at