Veritas Wonder Dogs & Pups

Veritas Wonder Dogs & Pups

* Required Fields

£19.46 - £23.46 (£16.22 - £19.55 Ex. VAT)

Click & Collect in store

Check stock at your local store

Click & Collect in store

Chosen store -

Loading stock for

In stock - collect from within 1 hour

Low stock - collect from within 1 hour

Out of stock at

Features

Key Features

  • Versatile bench top fittings
  • Use for: Long clamps, curved work, jigs, unique shapes, bench work.

In Detail

Hugely versatile bench top fittings, which come in very handy for all sorts of jig and homemade clamping devices. Veritas Wonder Dogs & Pups are basically bench dogs with a length of threaded bar through the top, tommy bar one end and brass clamping face at the other. The difference between them being stem length, Dogs are 165mm, Pups at 70mm. Dogs have a spring retainer, Pups an O-ring. Choice is dependent on bench top thickness, below 38mm use Pups, above 38mm use Dogs. All that is required to mount them is a 19mm hole. Use for making: Long Clamps, Curved Work, Jigs, Unique Shapes, Bench Work.

Reviews (4)

Reviews (4)

Features
Value
Quality
Features
Value
Quality

Bluekingfisher

17 November 2015

the usual great Veritas quality....... but

I bought a couple of the bench pups, they are of the usual Veritas quality to which I have begun to expect. Very well engineered and of good quality materials. I don't have a tail vice and so bought them with the intention of them acting in that manner. They hold the work securely, however the bar which serves as the dog protrudes relatively high when inserted into the bench, meaning when planing anything less than an inch or so in thickness the bar can foul the plane on the back stroke. You can of course remedy this by inserting a packer piece extending the distance from the rear of the board from the pup. Overall, a quality product for not a lot on money.
Value
Quality
Features

Ricardo

6 October 2014

Very Good

I bought the Pup version. Very good quality and very versatile. The only thing that disapointed me, was that I thought I was acquiring two units, and the box only comes with one, so be aware.
I'm becoming a real fan of Veritas :)
Features
Value
Quality

Niall

1 October 2014

Exceptional quality

These are very well made and extremely usefull. The dogs have a very high clamping force in a thick (80mm) Beech bench, they turn smoothly and the thread is fine enough to give a good clamping force with just hand pressure on the brass(?) 'tommy bar'. My only regrret is that I did not buy them before I drilled the bench holes as the effective working length of the threded part is about 10cm and my holes are 125mm apart so sometimes I have to pack one side of the piece to be able to clamp it.
Quality
Value
Features

Colin

12 May 2012

Great

I bought one of the pups. Then I bought another. I think they represent the best value for money I've had from a woodworking tool. I don't have a tail vice. These do the same job, and grip really well in holes that it's very easy to drill. It's also easy to attach a thinner piece of wood to the face of the clamp so that you can hold down and plane thinner work pieces, because the one downside is that they sit a bit high. They are beautifully engineered and a really great bargain.

Frequently bought with

Alternative options

People also looked at