It is just as important to clean saw blades and router cutters regularly as it is to keep other hand edge tools sharp.
Friction causes saw teeth and cutter edges to heat up in use. This allows resin in the timber to weld itself onto the cutting tips, increasing the friction and making the problem worse. Eventually the build-up it will affect cutting performance and the finished surface.
Keeping your blade clean can make a big difference in its performance. The build-up of gunk often makes a blade appear prematurely dull. A thorough cleaning can rejuvenate its performance.
Axcaliber Blade & Bit Cleaner is a special formula, thoroughly tested in Axminster’s own workshop and in some staff home workshops. It dissolves resin, pitch, goo, gunk, crud, gunge and other nasty residues, leaving your blades clean. Use on a regular basis to prolong the life of your expensive tooling.
Axcaliber Blade & Bit Cleaner comes in a convenient 500ml.
|Available Sizes||500 ml|
26 September 2018
Excellent resultsSprayed all blades and router cutters before lunch. Wiped clean 1 hour later. Very impressed!
21 August 2018
Terrible all roundFirst of all about this product. Ordered it to use on a Festool track saw blade and following the instructions found it had no effect whatsoever on the black residue/dirt that was on the blade. I then tried soaking the whole blade in a covered container overnight, again didn't even touch it. Had way better results using household washing detergent so go figure?!
21 June 2018
Very pleased works very well.I have now cleaned all my saw blades and router cutters they are all gleaming like brand new !!!!