Due to the adverse weather in some areas, delivery services may be disrupted in the coming days. Please allow a little extra time for your order to be delivered. We apologise for any inconvenience.
When fitting kitchen worktops using a worktop jig, it is necessary for the router cutter to be long enough to extend below the bottom of the worktop but retain a sufficient length of shank in the router collet. This can be difficult to achieve with some routers and when you add an extension to the router such as a sub-base a long shank is needed to provide sufficient protrusion from the base. It's critical that the router bit is inserted to the K Line as moving away from the line causes instability. With this in mind we have introduced a worktop cutter featuring a longer shank than usually found on this type of cutter. This ensures you have enough reach to cut safely through the work piece. These cutters also feature a bottom cut insert for efficient plunge cuts. 50mm depth of cut, 12.7mm diameter and 107mm overall in length.
|Shank Diameter||1/2" (12.7 mm)|
4 January 2018
Only use these nowI mainly fit solid wood worktops and these leave a super finish and plunge much easier. Not cheap but price into job.
14 December 2017
Poor quality for priceI have cut a good deal of work tops and this cutter is the same quality as a cutter for half the price . It is only good for cut one work top joint and bolt pockets (just about )