Designed for a first class result in all natural timbers and man-made boards, this blade is the perfect choice for professional use. It is particularly suited for mitre saws and would also suit workshop circular saws where a fine cut is required, particularly in laminate or faced boards.
The 5° negative rake enhances safety by giving a smooth start and preventing the blade from grabbing. It offers the benefit of cutting at a more controlled pace for a neater result. Top Centre Ground tooth grind profile where one flat top tooth is followed by a trapezoidal tooth which is slightly higher. The higher tooth cuts material narrower than final the kerf, helping to eliminate chipping in brittle materials such as chip board, and laminates.
Axcaliber Premium circular saw blades use the latest production techniques and the finest materials. The blades feature micro-grained TCT tips. The laser cut plates substantially reduce noise while cutting. A faint tensioning ring halfway across the plate indicates where each blade is individually pre-stressed, to guarantee smooth running.
The bore size is 30mm, various bore reducing bushes are available.
|Blade Diameter||254 mm|
|Bore Size||30 mm|
|Hook Angle||5° Negative Rake|
|Plate Thickness||2.2 mm|
|Maximum RPM||8,000 rpm|
14 November 2018
Excellent Saw Blade.Installed into my Bosch GTS 10 XC Table Saw. I tried a few test cuts to assess the blade's cutting ability and performance. I was very impressed cutting through the 30 mm jarrah in one pass. I noted that there was virtually no resistance as the blade literally cut though like a hot knife through butter.