A 100mm diameter rotary table equipped with four tee slots and faces at right angles to allow for either horizontal or vertical mounting on the mill table. With a gear ratio 36/1 and one turn of the handwheel is equivalent to 10 degrees. The control wheel movement is calibrated down to twelve minutes per graduation, so some really precise work is possible.
A tailstock for horizontal work, an 80mm four jaw chuck and tilting table for angled drilling and milling are also available separately. Height 60mm, centre height 52mm. Perfect for smaller work on most milling machines.
|Table Height||60 mm|
|T Slot Size||8 mm|