The AC125WDG is a combined dry and wet stone grinder/sharpening machine.
Most notably, the 120g wet stone is horizontal, running at 230 rpm. There is a water reservoir with a simple tap to control the water flow onto the stone. The machine has a simple but adjustable knife jig, allowing chisels, planer blades, knives etc to be clamped for honing. A horizontal stone creates the best edge shape, having no concave profile behind the edge.
Also included is a 100g 125mm diameter aluminium oxide dry stone which is 50mm wide and can be used for shaping your tool's edge before using the wet stone for honing.
Heavily built with a cast iron base, this machine is very well suited to the home woodworking workshop. With some time spent learning to use this machine, some very good results can be achieved.
|Grinding Wheel Diameter||125 mm|
|Motor Power||250 W|
|Wheel Width||50 mm|
|Plug Fitted||UK 3 pin plug|
|Wheel Speed||320 rpm (Wet) 2,850 rpm (Dry)|