This is a simple, easy-to-use spindle moulder intended for the home woodworker. It is made substantially from sheet steel and a generously sized cast iron table with a ground surface.
Powered by a 1.5kW motor with a choice of 4 spindle speeds, it can easily cope with many moulding, rebating or grooving tasks. It is fitted with a comprehensive fence system, with adjustable wings and work hold down "Shaw" style guards.
Another great feature is the 1,000mm sliding table. This is fitted with a mitre fence and work hold down clamp. This will securely hold your work past the cutter block. The spindle is 30mm in diameter, with many cutter blocks and accessories available to fit. The main spindle is easily removed, allowing the supplied router spindle/collet chuck to be fitted. The machine is fitted with a left/right rotation switch, digital speed readout and a separate Emergency Stop switch.
Modern spindle moulding tooling is safe to use. This machine is supplied with a 78mm Euro cutter block and we recommend Euro cutters. There is a very wide choice of cutter/limiter sets to choose from. As an alternative to a router and table, a spindle moulder has much to recommend, especially for deep rebates or moulds.
Supplied with tools and router spindle/collet chuck. Some assembly required.
Because of the high starting load, a 16A socket is required. 16A plug and lead fitted.
|Dust Extraction Outlet||100 mm|
|Max Spindle Projection Above Table||100 mm|
|Max Tooling Diameter Above Table||140 mm|
|Max Tooling Diameter Below Table||140 mm|
|Min Extraction Airflow Required||1,200 m³/hr|
|Overall L x W x H||660 mm x 1,000 mm x 1,100mm|
|Sound Power Level [Uncertainty K]||68 dB(A)|
|Spindle Diameter||30 mm|
|Spindle Speed||1,400, 4000, 6000, & 8,000 rpm|
|Spindle Travel||105 mm|
|Table Size||600 x 400mm|
|Plug Fitted||UK 16A Plug|