This woodturning lathe features 5 spindle speeds, a 240mm diameter turning capacity and 440mm between centres. It is well suited to the newcomer to turning who has a limited budget available and only space enough for a small lathe. Receive a free 3-hour woodturning session or a discount on a skill centre woodturning course, see banner below for more details.
The headstock, bed and tailstock are constructed of heavy cast iron whilst the 375W induction motor has more than enough power for the type of projects likely to be produced on a lathe of this size. The 5 spindle speeds give a useful range of between 760-3,200rpm. Both the headstock spindle and tailstock barrel are bored to take 2MT accessories, with the spindle having the common 1" x 8tpi thread. The tailstock also has a hollow barrel to enable long hole boring.
Supplied with Axminster drive and revolving tailstock centres, 75mm diameter faceplate and 150mm tool rest.
N.B. The distance between centres will vary and be dependent on the type of centres or accessories used.
|Distance Between Centres||440 mm|
|Headstock Taper||2 MT|
|Max Diameter over Bed||240 mm|
|Nett Weight||38 kg|
|Overall L x W x H||865 mm x 205 mm x 365 mm|
|Spindle Thread||T04M 1" x 8 tpi|
|Tailstock Taper||2 MT|
|Tool Rest Stem Diameter||16 mm (5/8")|
|Lathe Speed||700 - 2,800 rpm (5 steps)|