A good value-for-money disc sander which will be a great asset in any hobbyist's workshop.
The 300mm disc is driven by a quiet 750W induction motor and takes the full range of our 300mm diameter self adhesive discs. Tip!Self adhesive discs can easily be removed complete with their glue by gently warming with a hot air gun before removing. The motor is controlled by a no-volt-release switch and there is a brake provided to slow the disc down in a reasonable time.
The cast iron sanding table has a ground top surface and is provided with a slot for the adjustable mitre fence, used for end grain sanding. The table tilts to 45° and is firmly locked in position with heavy duty handles at both ends.
Dust is extracted from the bottom of the disc via a shroud which terminates in a 63mm diameter outlet. A 450mm length of flexible hose is provided with the machine; this has a 60mm diameter sleeve at the end which will connect directly to an extractor.
|Abrasive Disc Diameter||300 mm|
|Dust Extraction Outlet||63 mm|
|Min Extraction Airflow Required||390 m³/hr|
|Nett Weight||30 kg|
|Overall L x W x H||500 mm x 470 mm x 420 mm|
|Table Size||445 mm x 155 mm|
|Table Tilt||0° - 45°|
|Plug Fitted||UK 3 pin plug|
|Disc Speed||1,420 rpm|