The Axminster Craft ACCIH is a stand-alone, unpowered cyclone dust collector/interceptor. It uses the cyclone head from the Craft AC118CI Cyclone Dust Extractor. It is designed to be used with a standard High Volume Low Pressure chip extractor to provide the airflow. Using this interceptor, you can create a wood dust and chip extractor which will handle even fine dusts from drum sanders. You can either use this unit to upgrade your current workshop chip extraction system (with the typical bag filter) or place this unit next to a drum or belt sander to intercept the fine dusts before the air stream reaches the chip extractor.
This is just the Cyclone body unit only, fitted with a 250mm diameter flange mounting on the bottom to allow you to use your own waste container. This gives great flexibility of choice, size and mounting position within the workshop.
It is fitted with 102mm inlet and outlets, which suits many common woodworking machines. We recommend using a High Volume Low Pressure chip extractor with at least a 1.5hp motor, such as the Craft AC82E. It is not suitable for use with a High Pressure Low Volume (vacuum) type extractor.
|Hose Diameter||102 mm|
|Overall L x W x H||480 × 450 × 740mm|