An Axminster Deluxe 110mm Rotary Table plus a tailstock and indexing plates for more advanced operations.
Axminster Deluxe 110mm Rotary Table
This is a compact, high specification rotary table, 110mm diameter and suitable for use on the smaller milling machines. It is equipped with twin table locking clamps, No. 2 Morse taper central location, three tee slots and worm gear backlash adjustment. The 90:1 worm reduction gives a table rotation of 4 degrees per turn of the wheel and there are 120 subdivisions on the calibration ring to give a resolution 2 minutes of arc, sufficient for all but the most accurate of work. Two slots machined in the base allow for fitting tee-slot locating keys for quick and accurate location on the milling machine table. Height 75mm, centre height when mounted vertically 85mm.
Axminster Rotary Table Tailstock
A substantially made tailstock with centre height adjustable over the range 80 to 110mm. The base size is 130 x 95mm and there are 15mm wide slots at the two ends for securing it to the machine table.
Indexing Plates for Rotary Tables
These indexing plates are used in conjunction with the rotary table to enable the table to be rotated by an exact fraction of a complete turn, a particular requirement when machining gears, sprockets, etc. on a vertical mill. There are three indexing plates in the set which together provide all the subdivisions up to 50 (although 28 and 44 carry very small errors). There are a further 26 subdivisions available between 51 and 100 plus others above 100. The spring loaded index pin locates positively in the holes in the index plates and the two brass setting plates help to keep count of the number of holes moved by the pin.