This is a great mid sized heavy duty panel saw designed for ease of use and the high accuracy cutting of board materials of all types.
Offering a full 2,500mm before the blade, the heavy duty 2,600 x 360mm sliding table is robust and smooth running. A panel frame supports the larger boards and a mitre fence with extension plus 2 length stops is standard. There are plenty of adjustments that can be made to ensure accuracy, but these saws and sliding tables are matched and factory set.
Unusually, the saw has a choice of main blade size, either 305 or 355mm giving a maximum depth of cut of 110mm at 90°. A 120mm scoring blade powered by a separate motor is standard, giving the finest of scoring cuts on faced materials, preventing chipping of the edge of the cut.
The main table is a rigid, precision ground, cast iron surface of 548 x 896mm supported by a welded steel chassis, powder coated for long term protection. A cast iron rip fence body with fine width adjustment is complemented by a long, alloy extrusion fence arm, all running on a solid 40mm diameter chromed steel rail. Rear outfeed and side extension tables in thick gauge sheet steel are standard, along with a work clamp, handle and edge shoe for the sliding table.
As you can use blades up to 355mm in diameter, the overhead crown guard is included as standard; also included is a riving knife for 355mm blades. The overhead crown guard is much safer in use and gives much better dust extraction.
A 96T fine cross cut blade main saw blade from our Axcaliber Premium blade selection is supplied.
This is a simple, reliable and accurate panel saw, easy to use and an asset in many workshop situations.
Please ensure that your workshop electricity supply is adequate for these machines. If unsure, seek advice from a qualified electrician. N.B. 32A supply is required, (5 pin, 3 x L, N + E for 415V supply).
This machine was previously known as the P305/2600.
|Blade Diameter||305 mm or 355 mm|
|Blade Tilt||0° to 45°|
|Bore Size||30 mm|
|Dust Extraction Outlet||2 x 100 mm|
|Max Ripping Width||1,300 mm|
|Max Width of Cut with Fence||1,300 mm|
|Min Extraction Airflow Required||2,000 m³/hr|
|Nett Weight||582 kg|
|Number of Motors||2|
|Overall L x W x H||2,550 mm x 2,624 mm x 1,321 mm|
|Scoring Blade Bore||20 mm|
|Scoring Blade Diameter||120 mm|
|Sliding Table Dimensions||2,600 mm x 360 mm|
|Sliding Table Stroke||2,500 mm|
|Table Height||875 mm|
|Table Size||548 mm x 875 mm|
|Plug Fitted||UK 32A Plug|
|Max Depth of Cut @ 45º||63 mm with 305 mm blade - 75 mm with 355 mm blade|
|Max Depth of Cut @ 90º||110 mm with 355 mm blade - 90 mm with 305 mm blade|