Invaluable in any production joinery workshop.
Extremely versatile and taking only minutes to set up, the Axminster Trade AT3HT Tenoner is easy to use and accurate in operation. The AT3HT has all the attributes and features of a standard two head machine with the added advantage of a third 125mm scribing head. This allows many different configurations of tenons as well as many different moulding and scribes. Sets of Whitehill scribes and matching mould cutters are available to produce many traditional machined finishes for windows, doors etc. For further information, see our web site under Tenoning Accessories.
The large, ground cast iron sliding table glides easily on its ball race supported wheels. The cutter head movements are smooth and easily adjusted on dovetail slides. A cam action clamp secures work pieces on the sliding table against an end stop and fence. It then passes between two vertically mounted cutter heads, which machine the top and bottom cheeks of the tenon. Raising or lowering the top motor sets the tenon width and its position on the timber by raising/lowering the two motors in tandem. Variations in shoulder length are set using the rule on the end stop. To produce staggered tenons there is a hand wheel adjustment with digital counters to help the measurements. Stepped tenons, splayed tenons, scribed tenons, double tenons, and multiple bridles and finger joints are all possible on this versatile machine. Combinations of 90° and bevelled cutting discs with appropriate spacers will help produce interleaved joints as used in sash window construction.
Please ensure that your workshop electricity supply is adequate for these machines. If unsure, seek advice from a qualified electrician. N.B. 32A supply is required, (5 pin, 3 x L, N + E for 415V supply).
|Dust Extraction Outlet||2 x 150 mm|
|Horizontal Adjustment Scribing Head||30 mm|
|Horizontal Adjustment Top Block||±32 mm|
|Main Cutter Heads||1 @ 125 mm x 60 mm, 2 @ 175 mm x 60 mm|
|Max Length of Tenon Single Pass||155 mm|
|Max Length of Tenon Two Passes||205 mm|
|Nett Weight||470 kg|
|Overall L x W x H||1,320 mm x 1,020 mm x 1,560 mm|
|Power||3 x 2.2 kW|
|Scribing Head Shaft Diameter||30 mm|
|Table Size||800 mm x 310 mm|
|Timber Cap' Height Fence @ 45||130 mm|
|Timber Cap' Width Fence @ 45||195 mm|
|Timber Cap' Width Fence @ 90||310 mm|
|Vertical Adjustment Bottom Block||0 mm - 60 mm|
|Vertical Adjustment Scribing Head||95 mm|
|Vertical Adjustment Top Block||0 mm - 100 mm|