This is a heavy duty mobile cyclone dust extractor suitable for the medium to large sized joinery and general woodworking workshops. Able to handle most types of wood waste except for the very finest of dusts. With a 200mm inlet this is very suitable for a ducted workshop system, or if required, you could connect to three machines using the included 3 x 100mm adaptor. Nice and quiet in operation and features automatic filter cleaning for consistent airflow. A manometer gives a quick, visual indication of performance. The wheeled waste bin makes the task of waste disposal easier. This machine is a great all round extractor, able to cope with even large machines. Not too tall, so will be suitable for most workshops. Supplied with 0.2 micron polyester cartridge filter, plastic collection bag and steel impeller. N.B. 16A supply required.
|Airflow||2,800 m³/hr @ 200 mm|
|Container Volume||277 litre|
|Filter Performance||99% >0.2 micron|
|Filter Surface Area||6.5 m²|
|Inlet||1 x 200 mm or 3 x 100 mm|
|Nett Weight||179 kg|
|Overall L x W x H||1,200 mm x 670 mm x 2,200 mm|
|Sound Power Level [Uncertainty K]||78 dB(A) [1.5 dB]|
|Static Pressure||3,680 Pa|
19 April 2017
Axminster Dropped the ballWent to order a cyclone extractor but had to delay purchase by a few days. I went back to order a few days later and the price had increased by £360 approx., despite Axminster's ebay strore still selling at the cheaper price they wouldn't sell at the lower price, even although they would have ebay fee's to pay!!
Woodworks of Epping
24 August 2015
UB-3300 Cyclone ExtractorDelivery was on time & well organised, instructions were vague but managed to work it out, assembly is time consuming and fitting of motor requires 4 people ideally!
28 May 2013
Cyclone extractorThe installation was an adventure. After connecting to my new 20 cm ductsystem it works like a dream. Next morning I didn't find the layer of dust covering all, as I was used to.. I want to have a system with fout on/off switches on different locations in my workshop. I managed to realise it but it was more ussefull to have a complete wiring diagram to fix it. I'll recomment this machine to everyone.
5 November 2012
Cyclone ExtractorA nightmare to set up ... make shire you have four strong guys to hand. Once set up however its a great bit of kit. When you have one of these you will never go back to a bag system, Simply contains the finest dust including mdf. We use it attached to our CNC router. Drum could bit more heavy duty and could do with being spit in two.